Lawn Sprinkler Start Up Service

Sprinkler System Spring Turn On

 Every sprinkler system is different but they are all installed with the same basic principles. Here is a couple of tips for starting up the system for the first time in the spring.

•  Inspect all valve boxes for damage disconnected wires, rodent nests and debris
• Re-attach any fittings removed in the fall, secure with new teflon tape 
• Make sure ball valves and/or drains are open and water source is connected
•  Slowly begin filling up the system filling too fast causes hammering and can damage your system
• When water starts coming out of the drain, close the drain valve.
• Close any other valves to the outside (including sprinklers) and begin pressurizing the system.
• Once the system is pressurized, run through the stations one by one, letting each station operate for two minutes. Inspect for proper coverage, leaks, clogged nozzles, and any other irregularities.
• Make adjustments and repairs as necessary.
• Review the sprinkler times on the controller. Supplement rainwater to provide the lawn with just enough water to survive.

Sprinkler System Spring Start Up Services: